Jewellery made of precious metals

19. 1. 2021
In our production we use these precious metals:
 
Silver
Fineness of silver is 925/1000.
stribro draill)
Gold
We can use yellow, red or white gold. Fineness of gold is 585/1000 (14 carats).
We do not usually make a rhodium coat on white gold jewellery. Therefore, their color is a little to yellow. Rhodium surface can be worn out during some time. Rhodium coat can be made on demand.
For rings named Golden line, where gold wire is embedded into the ring, is used 24 carat gold (fineness 0.999).
golden draill_3 (3)
Mokume gane
Mokume gane rings are made from different precious metals. Most often it is a combination of palladium, silver and coloured gold. Some piece of mokume gane jewellery are made by ourselves, for others we cooperate with another goldsmiths.
mokume
 

What is a difference between precious and base metals?

If there is gold or silver used in jewellery and these metals exceed limits set by the Czech Assay Office then these jewels have to be marked with a hallmark. The list of hallmarks is here:

http://www.puncovniurad.cz/en/znacky.aspx

Base metals are not subjected to Hallmark legislation. However, a description of jewellery made of base metals must be clear enough to bring certainty that these jewels are not made of precious metals.

For more information please follow this link:

https://www.kredum.cz/clanky-znaceni-vyrobku-z-drahych-kovu.html

Rings made of precious metals and their options

Rings can be made in many variants. It is very hard to describe all of them so I would like to give you some basic informations about key parameters to form your idea about your future ring.
 
a) Shape of the ring

Most rings have a standard circular shape (such as Prima ring) but we can also make rings with a different shape according to your wish. Please contact us with your requirements.

b) Surface of the ring

Surface of the ring can be smooth (such as ring Prima, Klas), hammered (such as ring Natura, Wood, Archeos, Betula), with ground areas (such as ring Rock, Marro, Raw) or have other adjustments. According to this parameter we distinguish different types of rings.

Finish of our rings can be shiny, matte or rough matte. White gold jewellery can be made with a rhodium coat. Please note that this coat can be worn out during some time.

c) Profile (cross section shape)
When you cut the ring crosswise what would you see? There are three basic shapes.
1)    LENS shape
The surface of the ring is domed in the whole width of the ring. The inside of the ring can be flat (standard fit) or a little rounded (comfort fit).
2)    LENS with CUT EDGES
The surface of the ring is domed but the edges of the ring are flat. The inside of the ring can be flat (standard fit) or a little rounded (comfort fit).
3)    RECTANGLE shape
The surface and edges are flat. The inside of the ring can be flat (standard fit) or a little rounded (comfort fit).

Everyone has his/her own personal style and prefers a different ring appearance. In general it can be said that rings with a rectangular profile are more robust and less comfortable in comparison to domed rings, especially when rectangle rings are thicker. Comfort fit profile is more suitable for wider rings (6 mm and more). It depends on the shape of your finger and your habit of wearing rings or not.

 
profily
 
 "CF" - comfort fit
 

We can also make other shapes or surface adjustments to meet your requirements.

d) Ring size, width and thickness proportion
Someone prefers wide, thicker and sturdy ring and the other one prefers very gentle, comfortable  and discreet ring that would not disturb his/her daily routine. It is necessary to choose a good proportion between ring size, width and thickness of the ring. There is not any general guide.
 
Ring size is done so you have to choose an optimal width and thickness.
How to measure your ring size please see below.
 
Width of the ring
Standard width is somewhere between 3 and 7 mm but some types of rings can be made also narrower or wider. The minimal unit of width is 0.5 mm. So, we can make the ring 3, 3.5, 4, 4.5, … mm wide.
 
1
 
Thickness of the ring
There are three options for thickness: 1-1.5 mm, 1.5-2 mm and 2-2.5 mm. Rings with a comfort fit have to be a little thicker. Minimal thickness for these rings is 1.5 mm. If you are not sure about the thickness of your ring, it can be recommended.

Because our rings are handmade there can be some small deviation in sizes - our margin for this handmade work is 0.2 mm.

 

rozměry
 

We can make the ring also asymmetric. The ring can be wider on the top part and narrower in the lower part (in a palm). The head of this ring is wider and more sturdy. The ring with this shape is more comfortable and distinctive. It is suitable for rings with a gem or pearl. The proportion between width of the head and width of lower part has to be adequate otherwise the ring would rotate on the finger.

The head of the ring with a gem has to be made thicker to hold the gem. We can make this ring with the same thickness all around the whole length of the ring. This ring is robust and more massive. To make this ring more comfortable we recommend making it thinner in a lower part.

If you are not sure about sizes please contact us and we can help you.

e) Adornments and ornaments on the surface of the ring
There are many variants of ornaments and decorations that can be made on the surface of the ring.
For example:
Shape decorations
We can grind some parts of the ring off, for example a line all around the ring. We can also make some parts of the ring´s surface for example matte and the other part shiny. It will bring an interested contrast.
Ornaments made of different materials
We use precious metals like yellow, white or red gold and silver. These metals are soldered or hammered into the ring. We can make for example gold line all around the ring.
Gemstones and pearls
There are three basic groups of gemstones:
1. Cut gemstones
It includes diamonds and other cut gemstones like sapphire, garnet, emerald, etc. Diamonds can be set directly into the ring without using any adhesive materials. Other cut gemstones have to be set into a piece of silver or gold (yellow, white or red).
2. Natural uncut gemstones and pearls
These gems keeps their natural character and energy. Ways of setting these gems into the ring vary gem to gem. We can set for example moldavite, rough ruby, white or black pearl, etc.
3. Tumbled gemstones and cabochons
These gems have got a smooth surface. Ways of setting these gems into the ring is also different. It depends on the type of gems. We can set for example amber, turquoise, moonstone, citrine, amethyst, garnet and others.
 
f) Ring engraving
We usually make the engraving on the inside of the ring but it is possible also on its surface. We can engrave a name, date, picture, runes, monograms, fingerprints, etc.
 
We have these options for the engraving:
-        computer engraving (simple line, outline font or hatched font)
-        engraving made by templates
-        engraving made by hand
-        mintage engraving
 
g) Ring size
Measuring your ring size is the most important part in the whole process.

The best option how to get your ring size is to visit us in our gallery in Hořice where you can see our products personally and we can measure your ring size. You will be sure that your future ring will fit well. Here, you can see our rings, touch them, feel them and try them on. And maybe you will find your dream ring in our gallery collection. Before your visit please contact us in advance.

If you cannot visit our gallery due to a long distance or other reasons we offer simple test rings which are highly recommended especially before ordering worse resizable rings, such as rings with gems or gold line.

If you are not sure about the size of your future ring we strongly recommend not using strings and paper strips to measure your ring size. These methods are very inaccurate. The best variant is to visit a jeweller's shop and ask the specialist to measure your finger. It is important that the gauge, you use, should have approximately the same width as your future ring. The thin ring sits and behaves completely differently than wide ring. Please take into account also the fact that in hot weather your fingers can be a little swollen so different values can be measured in hot and cold weather.

We can make rings with standard flat inner side or with a comfort fit (rounded inner side). Comfort fit is recommended for wide rings. Rings with a comfort fit can be usually a little smaller in comparison to standard rings. Please let us know whether your ring size is determined by jeweller as a "comfort-fit" size or not.
If you order a wide ring with a standard flat inner side, then your ring size should be measured for wide rings.


If you have a ring that fits you well, but you don´t know its size, some jeweller or specialist can measure it with a tool called ring mandrel (measuring cone). Most jewellers use the leading edge of the ring (bottom edge of the ring when it is placed on a jewellers measuring cone) to determine the size, others use the middle of the ring and rarely some jewellers measure ring sizes on the other edge.

We measure the ring size of the ring with a standard flat inner side on the leading edge. Rings with a comfort fit are measured more in a centre of the ring.

You can also send us sample ring that fit you well and it will serve as a template.

I am sorry to say that there is not any uniform methodology for ring sizes conversion and according to our experience different jewellers measure ring sizes differently. We work with an inner diameter or circumference in our production. We can also make the rings in US or UK sizes - in this case we use this conversion chart with sizes that corresponds to our measuring tools.

If you want to be sure that your ring size is correct please give us your ring size measured as the inner diameter or circumference.

Please note that because our rings are handmade there can be some small margin in sizes - our margin for this handmade work is 0.2 mm.
Because the rings are handmade there can be some irregularity that highlights the overall design of our rings.

INCORRECT RING SIZE
if your new ring arrives and seems to be large or small, we suggest wearing it for some time. Different activities and temperatures throughout the day cause that our hands and fingers can be swollen sometimes, so it's normal to have a ring feel tight sometimes and loose other times.

(1) If you ordered your ring TOO SMALL, we can resize the ring up to 1-2 Czech size (1/4 - 1/2 US size, 1/2 - 1 UK size) by stretching the ring or by grinding the inside.

Please note that some types of rings cannot be stretched (for example golden line, rings with gems, ..). These rings can be resized up only by grinding the inside.

(2) If you ordered your ring TOO BIG, we can resize the ring down a little (approx. 1/4 US size, 1/2 UK size) by pressing the ring. Sizing down by pressing is difficult, some marks after pressing tool can stay visible on the ring. If the difference in sizes is large the ring after pressing can be a little curved or flatter.
Please note that some types of rings cannot be pressed (for example golden line, rings with stones, ..).
 
If you are decided for our ring please contact us with these information:
1)     type of the ring (structure on the surface: smooth, hammered, ground,..)
2)     your ring size (43-78)
3)     width of your ring (2-15 mm, minimal unit 0.5 mm)¨
4)     thickness of your ring (1-1.5 mm, 1.5-2 mm, 2-2.5 mm)
5)     profile (cross section shape) - where needed
6)     finish of the ring (matte, shiny, rough matte)
7)     material: white, red or yellow gold, silver
8)     inside of your ring (comfort fit or standard flat inside)
9)     required adornments and ornaments
10)   ring engraving
10)   date when you need the ring
 
The price is calculated according to these parameters.
 
You can also send us a photo of the ring that you like and we will try to make it similar.
 
I believe that this guide will help you to make a decision about the image of your future ring. If you need more help please do not hesitate to contact us.
 
Hynek Kalista and KREDUM team

Nahlédněte do výroby prstenů

Přehrát video

Kované opasky

Ručně vyráběné opaskové spony z nerezové oceli a damasteelu. Kvalitní kožené pásky pro každou příležitost.
Používáním tohoto webu souhlasíte s ukládáním cookies, nezbytných pro dobré fungování webu.